Oklahoma Sound The Orator, 46" High Built-in Sound Lectern #800x (Mahogany Laminate) - Manual (Page 4)

O KLAHOMA S OUND C ORPORATION ORATOR LECTERN: Model 800 / 800X
4 5
ASSEMBLY INSTRUCTIONS (#800)
Assembly Tips
Assembly of the Model #800 is easy and should take no more than five
minutes. Please read all instructions before beginning assembly. We strong-
ly recommend, to prevent damage to either yourself or the unit, that a
crew of two people be used when moving the podium on or off your work
table.
Parts
(1) Reading Desk
(1) Speaker Cabinet
(1) Base Section
(4) 1 1 ⁄
4
" Phillips Bolts
Tools Required
Phillips-Head Screwdriver.
Assembling Instructions
1) Place base section (with casters) upside down and line up the bolt
holes to match with speaker cabinet holes. Insert and tighten the four
(4) Phillips bolts.
2) Turn cabinet with base right-side up.
3) Insert top reading section into base unit and connect reading light
wires. Top front end should be facing as speakers do.
4) Align the top section and insert Black wing-bolt and tighten at desired
table height.
NOTE: Assembly for #800x
Base is the same as Model #800; For TOP section simply place on neck
and use included screws to connect 'Reading Top'.
Connection for Optional Battery
White cable from battery cord goes to Positive (+); Brass to Negative (-).
IMPORTANT do not reverse!
Dimensions 46"H (#800 42" lowered) x 22"W x 17"D; Wt. #800 78 lbs; #800x 71 lbs.
AMPLIFIER
SPEAKER CABINET
ADJUSTABLE KNOB
& WASHER (#800)
BASE
1-1/4" PHILLIPS BOLT
READING TOP
READING LIGHT PLUGS
ASSEMBLY DIAGRAM FOR MODEL 800