Tech specs, Video formats, Video output digital – AJA KONA 4 PCI-E Video I/O Card (HDMI Output, Cable Included) User Manual
Page 9: Video output analog, Video input digital, Downstream keyer, Audio input digital, Audio output digital, Sd to sd aspect ration conversion, Timecode

| KONA
www.aja.com
9
For full product specifications visit www.aja.com/en/products/kona4/#techspecs
Video Formats
•
525i 29.97
•
525i 23.98*
•
625i 25
•
720p 23.98*, 24*, 25*, 29.97*, 30*, 50, 59.94, 60
•
1080i 25, 29.97, 30
•
1080PsF 23.98, 24, 25, 29.97, 30
•
1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
•
2048 x 1080P 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
•
2048 x 1080PsF 23.98, 24, 25
•
2048 x 1556p 15, 14.98
•
2048 x 1556PsF 15, 23.98, 24
•
3840 x 2160P 23.98, 24, 25, 50, 59.94, 60
•
4096 x 2160P 23.98, 24, 25, 50, 59.94, 60
•
3840 x 2160PsF 23.98, 24, 25
•
4096 x 2160PsF 23.98, 24, 25
*These formats are dependent on specific software functionality
and are not normal ‘over-the-wire’ formats.
Video Output Digital
•
3G-SDI, SMPTE-259/292/296/424
•
Single Link 4:2:2 or 4:4:4 (1 x BNC)
•
Dual Link HD 4:4:4, (2 x BNC)
•
2K HSDL (High Speed Data Link) 4:4:4, (2 x BNC)
•
4K/UltraHD 4:2:2 and 4:4:4
•
HDMI v2.0b, 30/36 bits/pixel, RGB or YUV, 2.25Gbps, SD, HD
and UHD with HFR support up to 60p 4:2:0
Video Output Analog
•
Composite/S-Video (Y/C) (1 x BNC/2x BNC+adapter)
•
NTSC, NTSCJ, PAL
•
Component (3 x BNC)
•
HD: YPbPr, RGB
•
SD: YPbPr, RGB (component mode)
•
SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
•
12-bit D/A, 8x oversampling
•
+/- .2 dB to 5.0 MHz Y Frequency Response
•
+/- .2 dB to 1 MHz C Frequency Response
•
5% 2T pulse response
•
<1% Diff Phase
•
<1% Diff Gain
•
<1% ns Y/C delay inequity
Video Input Digital
•
3G/SD/HD SDI, SMPTE-259/292/296/424, 8- or 10-bits
•
Single Link 4:2:2 or 4:4:4 (1 x BNC)
•
Dual Link HD 4:4:4 (2 x BNC)
•
2K HSDL (High Speed Data Link) 4:4:4, (2 x BNC)
•
4K/UltraHD
•
1D LUT Support
Downstream Keyer
Supports graphics with alpha channel over video, matte or framebuffer,
or framebuffer content over incoming video or matte.
Audio Input Digital
•
16-channel, 24-bit SDI embedded audio, 48kHz sample rate,
Synchronous
•
8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous
or Non-synchronous, Internal sample rate conversion (via 4 x BNC on
breakout cable)
•
16-channel, 24-bit AES/EBU audio, 48 kHz sample rate, Synchronous (via
8 x BNC on optional K3G-Box)
Audio Output Digital
•
16-channel, 24-bit SDI embedded audio, 48kHz sample rate,
Synchronous
•
8-channel, 24-bit HDMI embedded audio, 48kHz sample rate,
Synchronous
•
8-channel, 24-bit AES/EBU audio, 48kHz sample rate,
Synchronous or Non-synchronous, Internal sample rate
conversion (via 4 x BNC on breakout cable)
•
16-channel, 24-bit AES/EBU audio, 48 kHz sample rate,
Synchronous (via 8 x BNC on optional K3G-Box)
SD to SD Aspect Ration Conversion
•
Letterbox: This transforms SD anamorphic material to a
letterboxed image.
•
H Crop: Will produce a horizontally stretched effect on the image;
transforms anamorphic SD to full frame
•
SD Pillarbox: Will produce an image in the center of the screen with
black borders on the left and right sides and an anamorphized
image in the center
•
V Crop: Will transform SD letterbox material to an anamorphic
image.
Timecode
•
LTC timecode input and output (via 1 x BNC each)
Machine Control
•
RS-422, Sony 9-pin protocol (via breakout cable or optional K3G-Box)
•
9-pin D-connector pinout is as follows:
1
GND
2
RX-
3
TX+
4
GND
5
No Connection
6
GND
Reference Input
•
Analog Color Black (1V) or Composite Sync (2 or 4V)
•
Looping
•
75 ohm on optional K3G-Box, terminated on supplied breakout cable
7
RX+
8
TX-
9
GND
Shell
GND
Tech Specs