Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 64)

64
Projection Procedure
3
Press the OK button to confirm the input signal type.
For multiple input signals, the projection layout is divided as follows.
The numbers 1, 2, 3, and 4 in squares represent the numbers of input
terminals.
• You can also switch to your preferred input signal for projection by pressing buttons on
the remote control to switch input signals (specifically, the DIGITAL or HDMI button).
• Using the projector’s multi-input feature, you can supply a single image via two or four
cables. As sources of input for projection at 4K or other resolutions, choose from [DVI
1x2], [DVI 2x2], [DVI 1x4], or [HDMI 1x2]. (
P54 )
• Signals you supply for Multi Input mode must meet certain conditions. If the signals do
not meet these requirements, a “ ” icon is displayed.
[HDMI 1x2]
1 2
[DVI 2x2] [DVI 1x4] [DVI 1x2]
When using
multiple
HDMI inputs
When using multiple DVI inputs
1 3
2 4
1 3 2 4 1 3