BenQ SL4302K 43" 4K Pantone-Validated SmSignage Display - Manual (Page 22)

Basic operations 22
Initial setup
After you have connected the display to the power, you are ready to power on the
display. The first time you power on the display, you will be guided through a series of
setup screens. Follow the on-screen instructions or the steps below to start up your
display and complete the initial setup.
1. Turn on the display. Wait for the display to boot up with the BenQ screen. This may
take a moment.
2. Select Next on the screen to begin. Follow the on-screen instructions to set up the
language, date and time, and network. Or your can skip some of these steps and
complete the setup later.
Setting
• Press MENU on the remote control or MENU button on the panel to enter the OSD
menu. You can also select Setting on the home screen to go to the OSD menu.
5. Press MENU to close the OSD
menu.
5. Press BACK to close the OSD menu.
MENU INPUT