BenQ SL4302K 43" 4K Pantone-Validated SmSignage Display - Manual (Page 12)

Setting up the display 12
Mounting in portrait position
This display can be installed in portrait position.
1. Remove the table stand, if attached.
2. Rotate 90 degrees clockwise from the back side of the display. The terminals will be
on the left and bottom side of the user from the back of the display.
5. Install the wall mounting bracket on
the display and attach the display to
the wall according to the mounting
bracket’s instructions. The length of
the screw should exceed the thickness
of the wall mounting bracket, please
refer to below chart for each model.
Make sure that all screws are
tightened and secured properly.
(Recommended torque: 16 (+2/-2)
kgf/cm). The mounting means should
be strong enough to bear the weight
of the display.
• To maintain proper ventilation, keep at least 10 mm of
clear space from the back cover of the display to the
wall.
• Please consult a professional technician for wall mount
installations. The manufacturer accepts no liability for
installations not performed by a professional technician.
Thickness
the wall
mounting
bracket
L2 mm
(L3”)
LCD
display
L1
mm
10mm
(0.39")
90 90