Godox V1 Flash for and Panasonic - Manual (Page 12)

This describes wireless (multiple shooting) using manual flash. You
can shoot with a different flash output setting for each slave unit
(firing group). Set all parameters on the master unit.
7. M: Wireless Flash Shooting with Manual Flash
Setting the flash mode to 1
.
Taking the picture. 3
Setting Flash Mode
You can directly operate the slave unit to manually set the manual
flash or stroboscopic flash.
Setting the slave unit. 1
that < M > is displayed.
Setting flash mode to . 2
● Press < MODE > button so
● Set the manual flash
output. (Page 41)
< >. Turn the Select
Dial to set the flash output
of the groups. Press Set
Button to confirm.
Setting flash 2
output.1/2/3/4
● Press Function Button 3
Gr
● Each group fires at the set
flash ratio.
8 . Multi: Wireless Flash Shooting with Manual Flash
● Setting the stroboscopic flash.
(Page 42)
Setting stroboscopic
flash.
● Press < MODE > button so that
< MULTI > is displayed.
Olympus/Panasonic
CH 21
Other Applications
Sync Triggering
The Sync Cord Jack is a Φ2.5mm plug. Insert a trigger plug here
and the flash will be fired synchronously with the camera shutter.
- 49 - - 50 -