beautypg.com

页 28 – Godox V1 Flash for Canon User Manual

Page 12

background image

Using Automatic Wireless Flash with Multiple Slave Units

When stronger flash output or

more convenient lighting operation

is needed, increase the number of

slave units and set it as a single

slave unit.

To add slave units, use the same

steps as setting “automatic

wireless flash with a single slave

unit”. Any flash group can be set

(A/B/C/D/E).

When the number of slave units is

increased and the master unit

flash firing is ON, automatic

control is implemented to make all

groups of flashes fire the same

flash output and ensure the total

flash output up is to standard

exposure.

Press the depth-of-field preview button on the camera to fire a modeling

flash.

If the slave unit’s auto power off function is workable, press the master

unit’s test button to power it on. Please note that test firing is unavailable

during the camera’s regular metering time.

The effective time of slave auto power off is changeable. (C.Fn-Sv

STBY

Page 55)

By making some settings, the auto AF-assist transmitter will not blink after

the slave unit’s flash ready indicator is lightened. (C.Fn-AF

Page 55)

Using Fully Automatic Wireless Flash

The FEC and other settings that set on the master unit will also be

appeared on the slave unit automatically. The slave unit does not

need any operation. Use the following settings to make wireless

flashes according to the same methods with normal flash shooting.

Flash Exposure Compensation ( Page 41)

Flash Exposure Lock (Page 42)

Manual Flash (Page 44)

Stroboscopic Flash (Page 45)

About Master Unit

Use two or more master units. By preparing several cameras that

with master units flash attached, cameras can be changed in

shooting while keeping the same lighting source (slave unit).

7. M: Wireless Flash Shooting with Manual Flash

This describes wireless (multiple shooting) using manual flash. You

can shoot with a different flash output setting for each slave unit

(firing group). Set all parameters on the master unit.

Setting the flash mode to

1

.

Taking the picture.

3

Setting Flash Mode

You can directly operate the slave unit to manually set the manual

flash or stroboscopic flash.

Setting the slave unit.

1

Setting flash mode to .

2

Press <

MODE

> button so

that <

M

> is displayed.

Set the manual flash

output. (Page 44)

Setting flash

2

output.1/2/3/4

Press Function Button 3

<

>. Turn the Select

Dial to set the flash output

of the groups. Press Set

Button to confirm.

Gr

Each group fires at the set

flash ratio.

8

.

Multi: Wireless Flash Shooting with Manual Flash

Setting stroboscopic

flash.

Press <

MODE

> button so that

<

MULTI

> is displayed.

Setting the stroboscopic flash.

(Page 45)

- 51 -

- 52 -

SONY

CH 21