页 26 – Godox V1 Flash for Canon User Manual
Page 10
Positioning and Operation Range
(Example of wireless flash
shooting)
●
Autoflash Shooting with One Slave Unit
● Use the supplied mini stand to position the slave unit.
● Before shooting, perform a test flash and test shooting.
● The transmission distance might be shorter depending on
the conditions such as positioning of slave units, the
surrounding environment and whether conditions.
Transmission distance is about 100m.
●
Auto Shooting with Two Slave Groups
●
Auto Shooting with Three Slave Groups
You can divide the slave units into two or three groups and perform
E-TTL II autoflash while changing the flash ratio (factor). In addition,
you can set and shoot with a different flash mode for each firing
group, for up to 4 groups.
Wireless Multiple Flash Shooting
A
C
D
Ceiling
Manual flash
B
E-TTL II
* The flash mode settings are indicated only as an example
●
Shooting with a Different Flash Mode set for Each Group
Manual flash
Manual flash
A
B
A
B
C
Slave Unit Setting
Master Unit Setting
Press <
> button so that
<
>
is displayed on the LCD panel.
Press <
> button so that
<
>
or
< >
are displayed on
the LCD panel.
2. Master Unit’s Flash OFF
When the master unit is set to OFF, only the slave units will fire a
flash.
Press