页 27, Other applications – Godox V1 Flash for Nikon User Manual
Page 12
This describes wireless (multiple shooting) using manual flash. You
can shoot with a different flash output setting for each slave unit
(firing group). Set all parameters on the master unit.
7. M: Wireless Flash Shooting with Manual Flash
Setting the flash mode to
1
Taking the picture.
3
Setting
You can directly operate the slave unit to manually set the manual
flash or stroboscopic flash.
Setting the slave unit.
1
Setting flash mode to
2
●
Press <
MODE
> button so
that <
M
> is displayed.
●
Set the manual flash
output. (Page 41)
Setting flash
2
output.1/2/3/4
●
Press Function Button 3
<
>. Turn the Select
Dial to set the flash output
of the groups. Press Set
Button to confirm.
Gr
●
Each group fires at the set
flash ratio.
8
.
RPT: Wireless Flash Shooting with Manual Flash
Setting
flash.
●
Press <
MODE
> button so that
<
RPT
> is displayed.
●
Setting the stroboscopic flash.
(Page 42)
Other Applications
It enables you to see the shadow effects on the subject and the
lighting balance. You can fire the modeling flash during wireless or
normal flash shooting.
Sync Triggering
Modeling Flash
The Sync Cord Jack is a Φ2.5mm plug. Insert a trigger plug here
and the flash will be fired synchronously with the camera shutter.
If the camera has a depth-of-field preview button, pressing it will fire
the flash continuously for 1 second. This is called modeling flash.
●
To avoid overheating and deteriorating the flash head, do
not fire the modeling flash for more than 10 consecutive
times. If you fire the modeling flash 10 consecutive times,
allow at least 10 minutes’ break for the camera flash.
In poorly-lit or low-contrast shooting environments, the built-in auto
focus assist beam will automatically light on to make it easier for
autofocus. The beam will light up only when autofocus is difficult
and get out as soon as the autofocus becomes correct.
If you want to turn off the auto focus assist beam, set the “AF” to
“OFF” on the C.Fn settings.
Auto Focus Assist Beam
●
If you find the auto focus assist beam does not light up, this
is because the camera has got a correct autofocus.
Position
Center
Periphery
Effective Range
0.6~10m / 2.0~32.8 feet
0.6~5m / 2.0~16.4 feet
CH 21
- 49 -
- 50 -