Godox V1 Flash for Nikon - Manual (Page 11)

Slave Unit Setting 2
● Set the V1N that to be
controlled as the wireless
slave unit.
● The slave unit can be set
as A/B/C/D/E.
● If the master unit and slave
unit(s) are set to a different
channel, set them to the
same channel. (Page 45)
Check the communication 3
channel.
Check that the flash is 5
ready.
● Check that the master flash
ready indicator is lightened.
● Then, the slave unit will
fire. If not, adjust the slave
unit’s angle toward the
master unit and distance
from the master unit.
Check the flash operation. 6
● Press the master unit’s
Test Button < > .
● Position the camera and
flashes as the picture
shows. (Page 44)
Position the camera and
4
flashes.
Using Automatic Wireless Flash with Multiple Slave Units
When the number of slave units is
increased and the master unit
flash firing is ON, automatic
control is implemented to make all
groups of flashes fire the same
flash output and ensure the total
flash output up is to standard
exposure.
To add slave units, use the same
steps as setting “automatic
wireless flash with a single slave
unit”. Any flash group can be set
(A/B/C/D/E).
When stronger flash output or
more convenient lighting operation
is needed, increase the number of
slave units and set it as a single
slave unit.
● The effective time of slave auto power off is changeable. (C.Fn-Sv STBY
Page 55)
● If the slave unit’s auto power off function is workable, press the master
unit’s test button to power it on. Please note that test firing is unavailable
during the camera’s regular metering time.
Using Fully Automatic Wireless Flash
The FEC and other settings that set on the master unit will also be
appeared on the slave unit automatically. The slave unit does not
need any operation. Use the following settings to make wireless
flashes according to the same methods with normal flash shooting.
● Flash Exposure Compensation ( Page 39)
About Master Unit
Use two or more master units. By preparing several cameras that
with master units flash attached, cameras can be changed in
shooting while keeping the same lighting source (slave unit).
- 47 - - 48 -