Godox V1 Flash for Sony - Manual (Page 9)

Hz
Maximum Stroboscopic Flashes:
Flash
output Hz
Flash
output
Wireless Flash Shooting: Radio (2.4G) Transmission
Using a flash (master/slave) with a radio transmission wireless
shooting function make it easy to shoot with advanced wireless
multiple flash lighting, in the same way as TTL autoflash shooting.
The basic relative position and operation range are as shown in the
picture. You can then perform wireless TTL autoflash shooting just
by setting the master unit to .
● The V1S attach to the camera is called the master unit, and
a V1S that is wirelessly controlled is called the slave unit.
● You can also wirelessly control the V1S set as the slave unit
with the transmitter X1T-S or XProS (sold separately). For
details on setting the master unit functions, see the
transmitter’s instructions.
1/4
1/8
1/16
1/32
1/64
1/128
1/256
1
8
14
30
60
90
90
90
2
6
14
30
60
90
90
90
3
4
12
30
60
90
90
90
4
3
10
20
50
80
90
90
5
3
8
20
50
80
90
90
6-7
2
6
20
40
70
90
90
8-9
2
5
10
30
60
80
80
1/4
1/8
1/16
1/32
1/64
1/128
1/256
10
2
4
8
20
50
70
70
20-50
2
4
8
16
30
40
40
60-100
2
4
8
12
20
40
40
Positioning and Operation Range (Example of wireless flash
shooting)
● Autoflash Shooting with One Slave Unit
● Before shooting, perform a test flash and test shooting.
● Use the supplied mini stand to position the slave unit.
● The transmission distance might be shorter depending on
the conditions such as positioning of slave units, the
surrounding environment and whether conditions.
Transmission distance is about 100m.
● Auto Shooting with Two Slave Groups
● Auto Shooting with Three Slave Groups
You can divide the slave units into two or three groups and perform
TTL autoflash while changing the flash ratio (factor). In addition, you
can set and shoot with a different flash mode for each firing group,
for up to 4 groups.
Wireless Multiple Flash Shooting
A
B
A
B
C
- 43 - - 44 -