Bolt VS-570SMI Wireless TTL Flash for Cameras - Manual (Page 13)

Mounting the Flash | 13
Mounting the Flash
The VS-570S and VS-570SMI employ different locking mechanisms. The VS-570SMI is equipped with
a locking wheel, and the VS-570S is equipped with a locking release button.
Mounting the VS-570SMI:
To mount the VS-570SMI on your camera, follow these steps:
1. Make sure the flash is turned off.
2. Rotate the locking wheel counterclockwise to loosen it.
3. Slide the mounting foot all the way into your camera’s hot shoe.
4. Rotate the locking wheel clockwise until snug. Be careful not
to overtighten.
To dismount the VS-570SMI from your camera, follow these steps:
1. Make sure the flash is turned off.
2. Rotate the locking wheel counterclockwise to loosen it.
3. Slide the mounting foot out of your camera’s hot shoe.
LOCK
45
60
75
LOCK
45
60
75
3
2