Bolt VS-570SMI Wireless TTL Flash for Cameras - Manual (Page 12)

12 | Installing Batteries
Installing Batteries
The VS-570 can be powered by four AA batteries of several types:
• Lithium (1.5V)
• Nickel-metal hydride (Ni-MH) (1.2V)
• Alkaline (1.5V)
Note: For the fastest recycle times and longest battery life, lithium or Ni-MH batteries are recommended.
To install batteries, make sure the VS-570 is turned off and follow these steps:
1. Press on the battery compartment cover and slide
it in the direction of the arrow to remove it.
2. Insert batteries in the orientations indicated by
the illustration inside the compartment.
3. Replace the battery compartment cover by
pressing and sliding it into place in the opposite
direction of the arrow on the cover.
Important! Replace all four batteries at the same time. Do not mix battery types or brands, or use old and new
batteries together.
2 1