Bolt VS-570F Wireless TTL Flash for Cameras - Manual (Page 26)

26 | Using the VS-570F as a Wireless TTL Slave
Using the VS-570F as a Wireless TTL Slave
You can set the VS-570F as a wireless TTL slave for both the Nikon and Canon TTL systems. This enables you
to use a Nikon or Canon wireless TTL master to control the VS-570F as a slave flash unit.
To set the wireless TTL slave mode, follow these steps:
1. Make sure the master flash or controller on your camera is turned on and set to automatic TTL mode.
2. Select the appropriate group and channel on the master unit. Consult the master’s manual for more
information on this topic.
3. Press the VS-570F’s Mode button repeatedly to
cycle through the flash modes until the Wireless
TTL mode icon appears on the LCD. Use the up
or down navigation buttons to select Nikon or
Canon TTL slave modes.
A. For Nikon TTL slave mode, the N-TTL
indicator will appear onscreen. Press the
Mode button to confirm, and the LCD will
display
i-TTL .
TTL
GROUP B