Bolt VS-570F Wireless TTL Flash for Cameras User Manual
Page 14
14
|
Mounting the Flash
To dismount the flash from your camera, make sure the VS-570F is turned off and follow these steps:
1. Turn the mounting foot lock counterclockwise to loosen it.
2. Slide the mounting foot out of your camera’s hot shoe.
Mounting the VS-570F on the included stand:
You can mount the VS-570F on the included stand in the same way you would mount it on your camera. This
allows you to set the flash up on a flat surface or to attach it to a tripod head, light stand, or clamp that has a
compatible 1/4
"
-20 screw mount.