Kopul CBT-12 - 12-in-1 Cable Tester - Manual (Page 3)

2
1 = -1
2 = +1
3 = -2
4 = +2 5 = -3
6 = +3
7 = -4
8 = +4
Speakon-4P
XLR/F-3P
RC
A/(Phono)
DIN 3P/5P/7P/8P
TRS-Jack
XLR/F-5P
Speakon-4P
XLR/M-3P
RC
A/(Phono)
DIN 3P/5P/7P/8P
TRS-Jack
XLR/M-5P
Speakon-8P
Speakon-8P
USB T
ype B
USB T
ype A
1
3
2
4
5
7
6
8
Batter
y Check
Ground
RJ45
• Illuminated LED pair indicates continuity of
corr
esponding pins • Illuminated Ground LED indicates short cir
cuit
(connection between pin and shell) • Batter
y Chec
k: bright LED indicates c
har
ged batter
y
• Manual leads:
continuity indicated b
y tone and LED
Jac
k 1 = sleeve
2 = tip
3 = ring
RCA (Phono)
1 = scr
een
2 = hot
CBT
-12
Speak
on
Cable T
ester
Precautions
• Please read and follow these instructions,
and keep this manual in a safe place.
• Make sure that this product is intact and that
there are no missing parts.
• Keep this unit away from water and any
flammable gases or liquids.
• Remove the battery during long periods of
non-use.
• Do not attempt to disassemble or repair the
equipment—doing so will void the warranty,
and Kopul will not be responsible for any
damage.
• Clean the unit with a soft dry cloth.
• Use only parts provided by the manufacturer.
• All photos are for illustrative purposes only.
Overview
Selection knob
Ground
LED
Battery Check LED
Banana plug
jacks
Battery compartment
Pin indicator and
continuity LEDs
Cable testing jacks