Impact Reflector Panel (28 x 39") - Manual (Page 6)

6
Page 6 Page 3
DO NOT EDIT
OR REVISE
ARTWORK
We will not approve artwork
which has been altered
by the vendor
FORWARD YOUR PROOFS
to [email protected]
FOR APPROVAL
BEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION
WITHOUT PRIOR APPROVAL OF PROOFS
Assembly Instructions Recommended Accessories
The reflector material is reversible. Place
the side you wish to use as a reflector face
down on a flat, horizontal surface. Place
the mounting bracket in the center. Insert one of the ends into one of the rod
locating holes on the bracket head.
1 2
Insert the other end of the flex rod into a
pocket in the corner of the reflector. Insert a second flex rod into a rod locating
hole on the bracket head next to where
you placed the first flex rod.
3 4
Impact Light Stand
The Impact LS-6B Light Stand is one of
the most economical light stands
available. It extends to a maximum height
of 6 ft, and has a standard 5/8˝ stud on
top with a 1/4˝-20 thread.
Impact Super Clamp
The Impact Super Clamp with Standard
Stud has strong jaws that can clamp on
flat surfaces or tubes from 1/2 to 2-1/8
inches in diameter. The clamp includes a
standard (5/8˝) stud that will accept the
Impact Reflector Panel or many other
light fixtures and accessories.
Impact Sandbags
Impact Sandbags come in a variety of
shapes, weights, and are either black or
orange. They are used for anchoring the
bases of light stands and set walls.
The saddle-style sandbags have two
wings so they can be draped over light
stand legs. Each side of the bag has a
hand strap for easy handling and hanging
on hooks. The outer shell is water
resistant, heavy-duty cordura nylon.
Impact Sandbags can be purchased
pre-filled or empty.
www.impactstudiolighting.com
To see these accessories and all of our lighting equipment,
please see your lighting dealer or visit our website: