Impact Reflector Panel (28 x 39") - Manual (Page 4)

4
Page 4 Page 5
DO NOT EDIT
OR REVISE
ARTWORK
We will not approve artwork
which has been altered
by the vendor
FORWARD YOUR PROOFS
to [email protected]
FOR APPROVAL
BEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION
WITHOUT PRIOR APPROVAL OF PROOFS
Disassembly Instructions
Insert the other end of the flex rod into the
nearest pocket on the reflector material. Without allowing the first two flex rods to
become disengaged, insert the third and
fourth flex rods. The rods will bend
naturally into position.
5 6
Your Reflector Panel is ready to be
mounted on a light stand, boom or super
clamp. Be sure to stabilize your setup
with a sandbag or other weight. Unlock the floating lever to release the tilt
mechanism and tilt the reflector into its
desired position. Unlock the thumb screw
to rotate the reflector into a new position.
7 8
1. Unmount the Reflector Panel from its light stand
or other support system.
2. Release one of the flex rods. Begin by bending it
free of the pocket in the reflector fabric.
3. After the first flex rod is released, the Reflector
Panel will collapse on its own and the rest of the
flex rods will be easy to remove.
4. Return all Reflector Panel items to their carry bag.
TILT
ROTATE