Steiner Optik 8x30 Military/Marine Binoculars - Manual (Page 16)

14
M
ai
nte
nan
ce
, Cl
ean
in
g an
d N
ote
s
21 21
20 20
19 19
18 18
Cleaning/Maintenance and Important Product Information:
Cleaning your binoculars:
Remove dust and loose dirt on the lenses with a brush. Then use only a soft, possibly damp cloth
to wipe the lenses. Failure to use a soft cloth can scratch the lenses. Wipe off salt water with a
damp cloth then use a dry cloth to wipe the lenses.
Care for the rubber armouring:
Binoculars resistant to water pressure may be rinsed under running water using liquid soap.
To close smaller hairline cracks that may be caused by UV radiation the rubber armouring
should be treated with Cockpit Spray or Nigrin Plastic Care.
Product Serial Number:
All STEINERs have their own serial number. This allows you to ascertain when your binoculars
were produced and it also provides a way (following the registration on the STEINER website)
to identify them in case of loss or theft. You can find the serial number of your binoculars
(depending on the model) at the front end of the binoculars’ axis, between the objectives
18 18 ,
on the underside of the binoculars’ axis 19 19 or in the objective lens 20 20 .
Important Safety Note:
Never look directly into the sun with your binoculars 21 21 ! This may cause serious damage to
your eyes and possibly lead to blindness!