Meopta 8x56 MeoPro HD Binoculars - Manual (Page 13)

EN
Maintenance and Cleaning
Important!
1. Protect the binocular from falling
and hard impact
2. Only clean the glass
as recommended
3. Protect the glass with caps
dust on the optical components should be blown off
or wiped off gently with the antistatic cloth supplied
with the scope. After using the binocular in the rain,
thorough drying with a soft cloth is recommended.
Make sure to store the binocular in a dry, ventilated
area. For storage in humid or tropical conditions we
recommend to place the binocular in a case, together
with a moisture absorbing agent such
as silica gel.
All Meopta binoculars feature a robust dust-proof
and water-proof design but, like any other opto-
mechanical devices, they require careful handling and
protection of the optical surfaces against damage.
When a scope is not being used, its outer optical
surfaces should be protected with the supplied caps.
Dust deposited on the mechanical parts
of the scope should be removed with a soft cloth;
Optical Cleaning Kit
A special Meopta cleaning kit can be purchased to
clean your optical device. It contains a high-quality
2-in-1 brush, lens cloth, cleaning blower,
and cleaning liquid.
Disposal-related Instructions:
Upon the expiration of its lifetime, dispose of the
equipment as O-category waste – catalogue number
200301 – mixed community waste.