Impact 180Ws Monolight Starter Flash with LED Modeling Light - Manual (Page 10)

10
Changing the Fuse
A 6A fuse is mounted in the rear panel and protects the circuitry of the flash. A
spare 6A fuse is fitted with the fuse holder. Always use a fuse with the same type
and rating.
1. Turn off the monolight, and disconnect the power supply.
2. Use a small screwdriver to release the fuse cover.
3. Remove the old fuse, and replace it with the new
one.
4. Reinsert the fuse holder by pressing it back into
place.
2