Godox AD100Pro & AD300Pro 3-Light Kit - Manual (Page 23)

Technical Data
AD100Pro
Radio transmission mode (compatible with Nikon & Canon & Sony&
Fujifilm & Olympus & Panasonic & Pentax )
Wireless off
Receiver unit of radio transmission
Nikon cameras (X1T-N, X2T-N, XProN as master unit)
Canon EOS cameras (X1T-C, X2T-C, XProC as master unit)
Sony cameras (X1T-S, X2T-S, XProS as master unit)
Fujifilm cameras(X1T-F, X2T-F, XProF as master unit)
Olympus cameras(X1T-O, X2T-O, XProO as master unit)
100Ws
9 steps: 1/256~1/1
Provided (up to 90 times, 99Hz)
Adjust the parameters in the 2.4G remote control
High-speed sync (up to 1/8000 seconds), first-curtain sync, and
second-curtain sync
0.01~30 seconds
√
1.8W: Light brightness: 1 to 10 levels
S1/S2
Receiver, Off
5 (A, B, C, D, and E)
100m
32 (1~32)
01~99
Lithium battery pack (7.2V/2600mAh)
Approx. 360
Approx. 0.01-1.5s
√
Power off automatically after approx. 30 minutes of idle operation.
3.5mm sync line, Wireless control port
5800±200k
120*76*76 mm
524g (battery included)
M/Multi
TTL/ M/Multi
Model
Wireless Receiver Unit
Mode
Flash Mode
Compatible Cameras
under Radio
Transmission
(as Receiver unit)
POWER
Power Output
Stroboscopic Flash
Flash Exposure
Compensation (FEC)
Sync mode
Delay Flash
Beeper
Modeling Lamp (LED)
Optic Receiver Flash
Wireless Flash (2.4G transmission)
Wireless flash function
Controllable Receiver groups
Transmission range
(approx.)
Channels
ID
Power Supply
Power Supply
Full Power Flashes
Recycle Time
Battery Indicator
Power Indication
Sync Triggering Mode
Color Temperature
Dimensions
Dimension
Net Weight
• Shut down the device immediately should abnormal operation be detected.
• Avoid sudden impacts and the product should be dedusted regularly.
• It is normal for the flash tube to be warm when in use. Avoid continuous
flashes if unnecessary.
• Maintenance of the flash must be performed by our authorized
maintenance department which can provide original accessories.
• This product, except consumables e.g. flash tube, is supported with a one-
year warranty.
• Unauthorized service will void the warranty.
• If the product had failures or was wetted, do not use it until it is repaired by
professionals.
• Changes made to the specifications or designs may not be reflected in this
manual.
• It is normal if the flash is smelly in non-firing situations.
Maintenance
Firmware Upgrade
• USB connection line is not included in this product. The USB port is
a Type-C USB socket.Type-C USB connection line is applicable.
• As the firmware upgrade needs the support of Godox G3 software,
please download and install the "Godox G3 firmware upgrade
software" before upgrading. Then, choose the related firmware file.
• As the product needs to do firmware upgrade, please refer to
instruction manual of the newest electric version as final.
- 43 - - 44 -