页 19, Flash mode — ttl autoflash, Flash mode – Godox AD100Pro & AD300Pro 3-Light Kit User Manual
Page 18: M: manual flash
Flash Mode — TTL Autoflash
Press < > Mode Selection Button to enter TTL mode. The OLED panel is
displayed
* Press < > Mode Selection Button and three flash modes will display on
the OLED panel one by one with each pressing.
TTL Mode
This flash has three flash modes: TTL, Manual (M), and Multi (Stroboscopic).
In TTL mode, the camera and the flash will work together to calculate the
correct exposure for the subject and the background. In this mode, multiple
TTL functions are Available: FEC, FEB, FEL, HSS, second curtain sync,
modeling flash, control with the camera’s menu screen.
High-Speed Sync
High Speed Sync (FP flash) enables the flash to synchronize with all camera
shutter speeds. This is convenient when you want to use aperture priority for
fill-flash portraits.
Please use the X2 series
2
transmitter to trigger.
Long Press Wireless Button
1
< > for 2 seconds so that
< > is displayed.
• With high-speed sync, the faster the shutter speed, the shorter the effective
flash range.
• Multi flash mode cannot be set in high-speed sync mode.
• Over-temperature protection may be activated after 60 consecutive high-
speed sync flashes.
The flash output is adjustable from 1/1 full power to 1/256th power in 1/10th
step or 1 step increments. To obtain a correct flash exposure, use a hand-
held flash meter to determine the required flash output.
Press < > button so that
1
< M > is displayed.
Turn the Select Dial or press the SET
2
button and turn the Select Dial
simultaneously to set the flash output. The
flash output will be adjustable from 1/10th
increasment or 1 step increasment by
turning the Select Dial directly or pressing
the SET button and turn the Select Dial
simultaneously.
Flash Mode
— M: Manual Flash
MODE
MODE
MODE
Press the