Planar Systems PLL2210MW-WH 21.5" 16:9 LCD Monitor (White) - Manual (Page 10)

8
Quick Installation
1. Connect either VGA or DVI Video Source from the monitor to the computer. Make sure
both monitor and computer are powered OFF.
2. Connect the audio cable from audio output of computer to the audio input of the monitor.
3. Connect the AC power cord to the AC/DC power adapter, then to the monitor.
4. Power-ON computer and then POWER-ON the monitor.
5. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x
1080 @ 60Hz.
Example:
DVI cable
VGA cable
Audio cable
PC
AC/DC Power adapter
AC Power cord