Planar Systems PLN2700 27" Monitor - Manual (Page 23)

21
Wall-Mount Installation Instructions
Attaching The Optional Wall Mount Arm (not supplied)
Follow these steps to finish installing the wall mounting arm:
1. Place the wall mounting arm onto the back of the LED LCD Monitor.
Line up the holes of the arm with the holes in the back of the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Reconnect the cables. Refer to the User's Guide that came with the
optional wall mounting arm for instructions on attaching it to the wall.
NOTE
100 mmx100 mm VESA high hole (n=4), M4, pitch
=0.7 mm screw mounting kit not included.