LG UltraWide 49WL95C-WY.AUS 49" 32:9 Curved Dual QHD HDR IPS Monitor - Manual (Page 19)

19
ENGLISH
[Settings] [Picture] [Picture Reset]
• [Do you want to reset your picture settings?]:
- [Yes]: Returns to the default settings.
- [No]: Cancel the select.
[General]
[Settings] [General]
• [Language]: Sets the menu screen to the desired language.
• [SMART ENERGY SAVING]: Conserve energy by using luminance compensation algorithm.
- [High]: Saves energy using the high-efficiency [SMART ENERGY SAVING] feature.
- [Low]: Saves energy using the low-efficiency [SMART ENERGY SAVING] feature.
- [Off]: Disables the feature.
- The value of energy saving data may differ depending on panel and panel suppliers.
- If you select the option of [SMART ENERGY SAVING] is [High] or [Low], monitor luminance become higher
or lower depend on source.
• [Automatic Standby]: Feature that automatically turns off the monitor when there is no movement on the
screen for a period of time. You can set a timer for the auto-off function. ([Off], [4H], [6H], and [8H])
• [DisplayPort Version]:
- [DisplayPort] / [USB-C]: Set DisplayPort Version to the same version as the connected external device.
([1.4], [1.2], and [1.1]) To use the HDR function, set to [1.4].
• [HDMI ULTRA HD Deep Color]: Provides sharper images when connected to a device supporting ULTRA HD
Deep Color.
- To use [HDMI ULTRA HD Deep Color], turn this function on.
- If the connected device does not support Deep Color, the screen or sound may not work properly. In this
case, set this function to off.
4K @ 60 Hz Support Format
Resolution: 3840 x 2160
Frame rate (Hz): 59.94/60.00
Color Depth / Chroma Sampling:
8 bit, 10 bit
YCbCr 4:2:0 / YCbCr 4:2:2
8 bit YCbCr 4:4:4 / RGB 4:4:4
• [Buzzer]: This feature lets you set the sound generated from [Buzzer] when your monitor powers on or off.
• [OSD Lock]: This feature disables the configuration and adjustment of menus.
• [Deep Sleep Mode]: When [Deep Sleep Mode] is enabled, power consumption is minimized while the
monitor is in standby mode.
- USB Charging and Hub functions will not work in standby mode while [Deep Sleep Mode] is enabled in
standby mode.
• [Information]: The following display information will be shown; [Serial Number], [Total Power On Time],
[Resolution].
[Settings] [General] [Reset to Initial Settings]
• [Do you want to reset your settings?]
- [Yes]: Returns to the default settings.
- [No]: Cancel the reset.