Lenovo Legion Y27-30 27" 180 Hz HDR Monitor - Manual (Page 28)

3-6 Y27-30 Flat Panel Monitor User’s Guide
Installing the monitor driver in Windows 10
To use the Plug and Play feature in Microsoft Windows 10, do the following:
1� Turn off the computer and all attached devices�
2� Ensure that the monitor is connected correctly�
3� Turn on the monitor and then the system unit� Allow your computer to start the Windows 10
operating system�
4� From the Lenovo website https://pcsupport�lenovo�com/solutions/y27_30, find the
corresponding monitor driver and download it to a PC to which this monitor is connected
(such as a desktop)�
5� On the Desktop, move the mouse to the bottom-right corner of the screen, choose Setting ,
double click Control Panel , then double click the icon of Hardware and Sound , and then
click Device Manager �
6� Click the Monitor tab�
7� Click the Properties button�
8� Click the Driver tab�
9� Click Update Driver , then click Browse the computer to find the driver program �
10� Select Pick from the list of device driver program on the computer �
11� Click the Hard Disk button� By clicking the Browse button and navigate to the directory that
you put your download drivers in�
12� Select the “ Y27-30.inf ” file and click the Open button� Click the OK button�
13� In the new window, select Lenovo Y27-30 , and click Next �
14� After the installation is completed, delete all downloaded files and close all windows�
15� Restart the system� The system will automatically select the maximum refresh rate and
navigate to the following directory corresponding Color Matching Profiles�
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality�
Lenovo recommends using either 1920 × 1080 at a refresh rate of 165 Hz, or 640 × 480 at a refresh
rate of 60 Hz�