Feelworld DH101 10.1" Portable Multi-Touch Monitor User Manual
Page 7

6
to adjust the analog value, after the adjustment, press
EXIT
key to exit.
Press
EXIT
key to bring up the Input , press the
<
/
>
key to select the
signal input, press
Exit
key to exit
5. Menu Operation Instructions
①
.
Use the USB-A to USB-C cable to connect the monitor to the power
supply. After the power is turned on, the indicator light turns red
,
the indicator lights up green after connected the signal.
②
.
Press the
MENU
key to enter the menu bar, use the
<
or
>