Vizio M-Series Quantum Q7-J01 58" Class HDR 4K UHD Smart Quantum Dot LED TV - Manual (Page 32)

32
3
USING THE RESET & ADMIN MENU
You can use the TV’s Reset & Admin menu to restore the TV to its factory default
settings as well as access other system settings .
Using the RESET & ADMIN menu, you can:
•
Reset the TV to factory settings
• Force the system to power off and on
• Create a system pin code to lock content
and picture settings
• Turn USB power on or off.
• Enable or disable program offers and
suggestions
• Enable or disable anonymous debug data
for system performance .
• Start or stop the store demo mode
Restoring the TV to Factory Default Settings
All of the on-screen menu settings can be reset to the factory defaults .
To restore the TV to its factory default settings:
Menu > System > Reset & Admin > Reset to Factory Settings
1 . If you set a system PIN code, enter it now .
2 . The TV displays, “Select Reset to restore all TV settings to factory defaults ."
3 . Highlight Reset and press OK .
4 . Wait for the TV to turn off. The TV will turn back on shortly afterward and the
setup process will begin .
Performing a Soft Power Cycle
A soft power cycle forces the TV to turn off then on again.
Menu > System > Reset & Admin > Soft Power Cycle > YES
Reset & Admin
Reset to Factory Defaults
Soft Power Cycle
Power Indicator
System PIN Code
USB Power
Viewing Data
VIZIO Privacy Policy
Store Demo
On
Always On
WARNING: If you restore the TV to the factory default settings, all
changes you have made to the settings will be lost . This includes any
wireless or picture settings .
Turning the Power Indicator On or Off
The power indicator on the front of your TV normally does not glow when the TV is
on . You can change this setting if you prefer the light to be on .
To turn the Power Indicator Light On or Off:
Menu > System > Reset & Admin > Power Indicator > ON/OFF