Vizio M-Series Quantum Q7-J01 58" Class HDR 4K UHD Smart Quantum Dot LED TV - Manual (Page 30)

30
3
Setting the Time and Local Settings
To ensure the correct time is displayed when you press the INFO button, set the
TV’s time zone:
Menu > System > Time & Local Settings > Time Zone
To turn Daylight Saving Time on or off:
1 . Highlight Daylight Saving Time and press
OK . The Daylight Saving Time menu
is displayed .
2 . Choose On if it is currently Daylight Savings Time, Off if it is Standard Time, or
Auto to have the system automatically detect Daylight Savings Settings .
Adjusting the CEC Settings
The CEC function on your TV enables you to control devices connected to HDMI
(ARC) input with the included remote, without any programming . Using CEC, your
VIZIO TV remote can control:
• Power On/Off
• Volume
• Mute
To enable, disable, or adjust CEC settings:
Set up your audio device and connect it to the HDMI-1(HDMI Arc) input on the TV .
On your audio device, select the HDMI ARC input .
Menu > System > CEC
Select a setting and then press OK .
• CEC: To use CEC, you must select Enable .
• Device Discovery: To determine if your device is connected and supports CEC,
select Device Discovery and then press OK .
Adjusting the Power Mode
Your TV is set to Eco Mode by default. When the TV is powered off, the Eco Mode
setting uses less than 0 .5W of power . Quick Start Mode enables your display to
power on faster and also to turn on when powered from another device (such as
when you are casting onto the TV) .
To switch between Eco Mode and Quick Start Mode:
Menu > System > Power Mode
Highlight either Eco Mode or Quick Start Mode and press OK .
WARNING: Please note that by changing this setting the energy
consumption required to operate this device will change .
WARNING: Not all HDMI devices support CEC . See your device’s user
manual for details .