Samson Graphite 49 - USB/MIDI Keyboard Controller - Manual (Page 21)

21
Graphite 49 · USB/MIDI Keyboard Controller
EN
GL
ISH
FRANÇAIS
DEUTSCHE
ESP
AÑOL
IT
ALIANO
Available parameters in Zone Mode:
Parameter Description Range
Zn: Prog
[1]
Program number for playing on the specific section of the
keyboard
[2]
0–127
Zn: MSB Most Significant Bit of the program bank for playing on the
specific section of the keyboard 0–127
Zn: LSB Least Significant Bit of program bank for playing on the
specific section of the keyboard 0–127
Zn: Port Transmitting port 1–5
Zn: Ch. Transmitting channel 1–16
Zn: Rang< Note number of the most left key in the specific section of
the keyboard
[3]
0–127
Zn: Rang> Note number of the most right key in the specific section of
the keyboard.
[3]
0–127
Zn: Oct Octave shift for the specific section of the keyboard. [4] -4–0–4
Zn: Trans Transpose for the specific section of the keyboard. [5] -12–0–12
[1] “n” represents zone number
[2] If you set different programs in different zones with the same port and channel, it will cause a
conflict, and the unit will use the program of the last activated zone.
[3] Press a key on the keyboard to set the beginning and end key of the range. If the end key is lower
than beginning key, the entry will be rejected.
[4] Use the OCTAVE +/- buttons to change the octave shift.
[5] Use the TRANSPOSE +/- buttons to change the transpose.
Zones