GRAM 49SF 4186 F - Manual (Page 44)

EN - 43
7 BEFORE CALLING AFTER-SALES SERVICE
Errors
Your freezer will warn you if the temperature of the freezer is at an improper level or if a
problem occurs with the appliance. Warning codes are displayed in the freezer Indicators.
ERROR TYPE MEANING WHY WHAT TO DO
E01 Sensor warning
Call Service for assistance as
soon as possible.
E02 Sensor warning
Call Service for assistance as
soon as possible.
E03 Sensor warning
Call Service for assistance as
soon as possible.
E06 Sensor warning
Call Service for assistance as
soon as possible.
E07 Sensor warning
Call Service for assistance as
soon as possible.
E08 Low Voltage Warning
Power supply to the device
has dropped to below
170 V.
-This is not a device failure, this
error helps to prevent damages
to the compressor.
-The voltage needs to be
increased back to required
levels
If this warning continues an
authorised technician needs to be
contacted.
E09
Freezer compartment
is not cold enough
Likely to occur after long
term power failure.
1. Set the freezer temperature
to a colder value or set Super
Freeze. This should remove
the error code once the
required temperature has been
reached. Keep doors closed
to improve time taken to reach
the correct temperature.
2. Remove any products which
have thawed/defrosted during
this error. They can be used
within a short period of time.
3. Do not add any fresh produce
to the freezer compartment
until the correct temperature
has been reached and the
error is no longer.
If this warning continues an
authorised technician needs to be
contacted.
If you are experiencing a problem with
your appliance , please check the following
before contacting the after-sales service.
Your appliance is not operating
Check if:
• There is power
• The plug is correctly placed in the socket
• The plug fuse or the mains fuse has
blown
• The socket is defective. To check this,
plug another working appliance into the
same socket.
The appliance performs poorly
Check if:
• The appliance is overloaded