GRAM KS 3135-90/1 - Manual (Page 82)

EN 10
Installation (Under the
counter)
be 820mm.
(!) Cookers or other heat sources must
not be placed above the counter where
the appliance is installed under the
counter.
close to the right or left hand side of the
appliance.
appliance. There are 4 screws(2 pieces
at the back, 2 pieces below the front
edge) that should be removed.
Fig. 1
and then remove it by the help of pliers.
counter and adjust the front feets until
its top touches to the counter.
In order to use the product under the
counter, the distance between the wall
and the reference indicated in the top
connection plastic must be minimum
595 mm.
Fig. 2-3
by using 2 of the screws that was
removed from the top cover.(Material of
the counter must be plastics or wood
based!)
Fig. 4
Adjusting the legs
If your refrigerator is unbalanced;
You can balance your refrigerator by
turning its front legs as illustrated in the
figure. The corner where the leg exists is
lowered when you turn in the direction
of black arrow and raised when you
turn in the opposite direction. Taking
help from someone to slightly lift the
refrigerator will facilitate this process.