İhlas Aura MaxiVac - Manual (Page 11)

Cleaning and maintenance
Washing process warnings and precautions
• Surfaces to be washed must thoroughly
sweeped first.
• We strongly recommend that you use Aura
shampoo in your product. You can provide Aura
shampoo from authorized services.
• Other shampoos, cleaning chemicals, foaming
liquid or powder detergents may damage
your device.
• Never run the pump when the water tank is
empty.
• If the water in the tank runs out while the
pump is running, turn off the water pump
immediately.
• Repeat the cleaning process a few times for
very dirty carpets and upholstery.
• Before using your washed items such as
carpets, sofas, etc., let them dry for about
two hours.
• Turn off the on/off switch and unplug the
device. Remove all attacment and suction-hose
from the device.
• Empty the dirty water reservior, wipe with a
cloth to remove dirt, rinse thoroughly with warm
water and allow to dry completely before
storage.
• Remove sponge filter, rinse and allow to dry
completely.
• Rinse and clean all parts and accessorries
thoroughly and allow to dry completely.
• To clean the suction-hose, flush clean by
running hot tap water through it and allow to
dry completely before using again or storage.
After carpet washing and wet
vacuuming
2 1
Lift the head unit from
the dirt collection tank.
To drain remaining water,
turn the head unit sideways
as in the way it is.
4 3
Remove the filter
cover by turning the
lock anticlockwise and
pulling outwards.
Remove the filter slot
in the direction of the
arrow.
5 6
Remove the sponge
filter in the direction
of the arrow.
Remove the suction
group.
IMPORTANT
Maintenance must be performed by an authorized
service technician.
WARNING
Always unplug the device from the mains power.
Before use start with cleaning and maintenance.