Blowing, Now, your device is ready for carpet washing – İhlas Aura MaxiVac User Manual
Page 10

10
If needed, attach the
rubber to the big/mini
washing nozzle by
sliding tool onto the
front of the head.
Attach big/mini washing
nozzle to the telescopic
tube and lock it in place.
Attach the spray
trigger to the handle.
Attach the washing set’s tube extension to
the free end of the washing set tube and lock
it by turning.
Attach free end of washing set’s tube extension to
the big/mini washing nozzle. - To attach the tube
extension, insert and turn it clockwise 90 degrees.
- To release, turn it anticlockwise 90 degrees and
remove.
Secure the spraypipe to both
external surfaces of the
telescopic tube and suction hose
by using the securing clamps.
17
18
19
20
Press the trigger's
button to begin spraying
water from big/mini
washing nozzle.
24
In order to use the blowing
feature, remove the cover and
sponge filter on the rear air
outlet duct of your device and
attach the blowing apparatus
(Accessories 10). Turn on the
device by inserting the hose end
into the blowing apparatus. The
blowing feature is ready to use.
First press power on green button. If machine is
on, the led light on the switch will be illuminated.
Then press pump on red button. If pump is on,
the led light on the switch will be illuminated.
22
1
2
3
23
Insert long end of the
washing set’s
spraypipe to the
checkvalve inlet.
21
16
13
14
15
NOW, YOUR DEVICE IS READY FOR CARPET WASHING.
Blowing