KORG LP-380-73 - Manual (Page 5)

5
Preparation and demo performances
Before you begin playing
About the included stand
The LP-380 is used with the included stand.
Make sure that you read the “Assembling the stand” section that can be found on page 17
before proceeding.
Connecting the Power
Connect the supplied AC adapter to the power cord. Insert the DC plug end into the
DC19V jack on the rear of the conector box. Next, plug the power cord into an AC outlet.
Pass the AC adapter cord through the cord hook so that the plug won’t be
removed from the jack accidentally (Fig. 1) . When you unhook the cord,
don’t pull on the cord with force.
Be sure to use the AC adapter that came with your unit. Using other AC
adapters may cause the malfunctions or other unforeseen events.
Be sure to plug the unit into an AC outlet of the appropriate voltage.
Opening or closing the key cover
Opening the key cover
1. Using both hands, gently lift the key cover to open it.
2. Fold down the edge on the end of the key cover.
Closing the key cover
1. Raise the edge, and gently pull the key cover toward yourself.
2. When the key cover begins to close on its own, release it.
The key cover is designed to close softly on its own from about mid-way down.
Do not forcibly pull the key cover when closing this. In addition,
do not forcibly close the key cover by applying strong pressure.
Doing so will damage the unit.
Be careful not to pinch your fingers or hands when closing the key
cover.
The temperature and humidity will affect how fast the key cover
closes.
The key cover may make a faint clicking sound when it’s be-
ing closed slowly. This is normal behavior for the unit.
Be careful not
to bend this part
too much when
you insert the
power cord.
Fig. 1
to AC outlet
AC adapter
Power cord for
the AC adapter
Cord hook
DC plug