ProSoft Technology PTQ-104C - Manual (Page 75)

49TPTQ-104C ♦ 48TQuantum Platform Downloading the PCB File to the Module
47TIEC 60870-5-104 Client
12TUser Manual
6 Downloading the PCB File to the Module
In This Chapter
 Downloading via Serial Connection ....................................................... 76
 Downloading via Ethernet Connection ................................................. 77
For the module to use the configured settings, download the updated
configuration file from the PC to the module. This can be done over Ethernet or
Serial connection.
Note:
The processor (Quantum) must be in "Stop" mode before the file is downloaded to the
module. Use the processor’s configuration tool or the softkeys on the processor to stop the
processor.
ProSoft Technology, Inc. Page 75 of 136
March 4, 2013