ProSoft Technology PTQ-104C - Manual (Page 14)

Start Here 49TPTQ-104C ♦ 48TQuantum Platform
12TUser Manual 47TIEC 60870-5-104 Client
1.3 Installing the ProTalk Module in the Quantum Rack
1 Place the Module in the Quantum Rack. The ProTalk module must be placed
in the same rack as the processor.
2 Tilt the module at a 45
° angle and align the pegs at the top of the module with
slots on the backplane.
3 Push the module into place until it seats firmly in the backplane.
Caution: The PTQ module is hot-swappable; it can be installed and removed while the rack is
powered up. Do not assume that this is the case for all types of modules unless the user manual
for the product explicitly states that the module is hot-swappable. Failure to observe this precaution
could result in damage to the module and any equipment connected to it.
Page 14 of 136 ProSoft Technology, Inc.
March 4, 2013