Mirror Image Teleprompters SF-160 - Manual (Page 3)

Step #2
Remove four plastic knobs on mount
to reveal the bolts. Place the
monitor assembly over the bolts &
tighten the four plastic knobs back
in place.
Step #3
Mount Triangle Hood Brackets to
monitor assembly using plastic
knobs, bolts, washers. Do not over-
tighten at this time; it is easier to
mount the hood & mirror while
hood brackets are slightly loose.
Step #4
Remove the 4 knobs & washers on the back of
the metal hood. Mount the hood to the hood
brackets by feeding the hood’s bolts thru the
slot in hood bracket. Place the washers &
knobs back onto the hood’s bolts & tighten
securely. Next, tighten the knobs holding the
hood brackets to the monitor assembly.