SAF-HOLLAND XL-FW428-01 FW2800 Series Hydraulic Elevating Fifth Wheels - Manual (Page 3)

XL-FW428-01 Rev A SAF-HOLLAND, Inc. 3
OPERATING INSTRUCTIONS
Before You Begin
IMPORTANT: This unit is not intended for operation on public streets and
highways with the fifth wheel in the up position. Do not operate
this unit on public highways unless the fifth wheel manual
secondary lock is engaged. The fifth wheel must be in the full down
position and the lockdown pins (option -87) fully engaged.
IMPORTANT: Towing a trailer in the elevated position raises the center of
gravity and increases the risk of vehicle rollover. To avoid rollover,
do not travel at excessive speeds and do not make sudden turns
or maneuvers.
Failure to lower fifth wheel to full down position and engage
lockdown pins prior to
moving a coupled tractor
will increase vehicle
instability which, if not
avoided, could result in
serious unjury or death.
Failure to properly couple the fifth wheel according to these
instructions could result in tractor and trailer separation, causing
death or serious injury to others.
Fifth Wheel Inspections
1. Inspect the fifth wheel and mounting.
Tighten loose fasteners.
Replace missing fasteners.
Repair/replace missing,
cracked or otherwise
damaged components.
2. Inspect the lock jaws. If they
appear dry, apply grease to the
lock jaws and the front of the throat.
3. Tilt the ramps down.
3
3
3