Precision Medical PM50 EasyComp Compressor - Manual (Page 7)

6
GROUNDING INSTRUCTIONS
The Easy Comp Compressor must be plugged into an
electrical outlet that is properly grounded. In the event of an
electrical short circuit, grounding reduces the risk of electrical
shock. This product is equipped with a grounding circuit.
DANGER
Improper use of the grounding plug can result in a risk of
electrical shock.
WARNING
Ground reliability can only be achieved when the power
cord is connected to a properly grounded receptacle.
OPERATING INSTRUCTIONS
CAUTION
Inspect the Easy Comp Compressor for visual damage,
DO NOT USE if damaged.
1. Become familiar with the Compressor (see Compo-
nent Identification).
2. Place Compressor near a properly grounded electrical
receptacle on a table, floor or other horizontal, smooth,
hard surface.
Allow a minimum of 4 in. (10 cm) clearance on all sides to
ensure adequate air flow for cooling of product.
3. Press down on Compressor until Suction Feet are
secure.
4. Ensure the On/Off Switch is in the “OFF” position.
5. Plug the Compressor into a properly grounded
receptacle.
6. Attach appropriate device to the Outlet Fitting, securely,
without overtightening.
7. Press the On/Off Switch to the “ON” position.
8. Adjust pressure.
To INCREASE pressure - Turn Knob CLOCKWISE
To DECREASE pressure - Turn Knob
COUNTERCLOCKWISE