Meliconi Speedy 210 combo - Manual (Page 2)

8
Do not leave fl at batteries inserted, as liquid may leak and damage the remote control
The Speedy 210 combo remote control is a universal remote, so its memory contains data relating to numerous
devices of various brands available on the market.
Each original device has a specifi c code which must be used to set up the remote control.
Therefore, to use Speedy 210 combo you must enter the specifi c code for each device you want to control.
Use one of the following methods to identify the correct code and set it in your remote control:
A) - INTERNET (recommended)
B) - MOBILE PHONE (SMS)
C) - MANUAL SEARCH
SETTING THE CODE
If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guida website to
identify the specifi c codes for the devices you want to control. Then set the codes manually in your MELICONI remote
control as described in the ENTERING THE CODE DIRECTLY procedure.
SETTING CODES USING INTERNET
From today, MELICONI gives customers who don’t have internet access the chance to receive the codes for
programming their remote control directly on their mobile phone.
SETTING CODES USING A MOBILE PHONE
(the service is fee, the only cost being that of sending the SMS, which depends on your service operator tariffs)
Send an SMS as follows: 2C, Type, Brand, Model
Indicate the type of device to be controlled using only one of the following
abbreviations: TV
SAT (satellite decoder)
TER (terrestrial decoder)
indicate the brand of the device to be controlled
indicate the model of the device to be controlled, usually shown on a label
on the back of the device (if you don’t know the model, don’t write anything
after the brand)
2C, TV, PHILIPS,
32PFL3614
EXAMPLE:
2C, TV, PHILIPS, 32PFL3614
Fixed text which must always be included