Meliconi Speedy 210 combo - Manual

7
Keep this booklet for future reference.
Thank you for choosing a Meliconi remote control.
The Speedy 210 combo remote control can control a TV (analogue or digital) and can also simultaneously control a
decoder if one is connected to it (terrestrial or satellite).
Thanks to its combined keypad, there is no need to manually select the device to be controlled. Using Speedy 210
combo to control both devices (TV + DECODER), the light blue buttons automatically control the TV, and the dark
blue buttons control the DECODER, but it is also possible, with suitable settings, to make all of the buttons control a
single device.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
Its ergonomic shape and soft rubber body make it easy to grip and protect the remote control if it is knocked and
dropped.
IMPORTANT: The remote control must not be exposed to excessive heat sources.
USE OF THE BUTTONS AND FUNCTIONS
The functions of the buttons described below are available only if they are on your original device.
COMBO
Selects the next programme.
Menu options confirm button
Turns down the TV volume .
Numeric keypad.
Indicator light.
Button for exiting Teletext and
returning to normal screen.
TV ON button, sometimes needed to switch on the TV.
Turns up the TV volume.
For selecting an external input sourcefor the TV.
Teletext button.
Selects the previous programme.
ON/OFF switches the TV OFF and in some cases ON.
OFF for switching off the decoder (STB).
Before using the remote control, insert the batteries and programme it.
INSERTING THE BATTERIES
The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries.
Insert them as illustrated.
Try pressing a number button and check that the red light remains lit continuously
until you release the button. If the light fl ashes, the batteries inserted are not charged
and are about to go fl at, therefore you must substitute them.
Menu options exit button
Selects digital TV and radio
I EN