Silvercrest SHBS 1000 A1 - Manual (Page 73)

73 GB/MT
Pull the mains adapter out of the mains socket
- if a fault occurs,
- before you clean the device,
- if you intend leave the device unused for a long period,
- after every use.
When doing this, pull directly on the mains adapter and not on
the lead.
Stop using the device immediately if the lead, mains adapter,
housing or any other part is found to be damaged.
Use only the supplied original mains adapter for mains operation.
Connect the mains adapter to an easily accessed mains socket only.
Do not cover the mains adapter, otherwise it may lead to a
dangerous build-up of heat.
Q
Before first use
The hair and beard clippers can be operated as a cordless device
or from the mains adapter.
Q
Charging the batteries
The batteries should be charged for at least 3 hours before the hair
and beard clippers are used for the first time. For subsequent charging
processes, a charging time of 90 minutes is adequate.
Make sure that the device is fully charged before you use it without the
plug-in mains adapter.
The device is fitted with 2 NiMH rechargeable batteries and an
overcharge protection system so that the batteries can be topped up
without being overcharged.
Safety / Before first use Safety