Silvercrest SHBS 600 A1 - Manual (Page 58)

56 GB
6. Figures H+I: press the black fastening clips carefully away from the sides
of the board and remove the board from its fastening.
7. Figure J: release the connections between the batteries and the board with a
pair of pliers/wire cutters. Remove the exposed batteries. Take the batteries and
the device separately to suitable disposal.
The nickel-metal hydride batteries used for this device may not be
treated as household waste. The batteries must be disposed of
properly. Contact battery distributors or local waste disposal
points for this.
8. Problem-solving
If your device fails to function as required, please try this checklist first. Perhaps
there is only a minor problem, and you can solve it yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device yourself under any circumstances.
Fault Possible causes/Action
No function
• Has the device been connected to the power
supply?
• Are the batteries empty?
The blades2 of the shav-
ing head9 are not running
smoothly • Has the shaving head been cleaned and the
blades oiled?
NiMH
__GRA78917_B2.book Seite 56 Donnerstag, 6. September 2012 7:53 07