beautypg.com

Cleaning and maintenance, 8 setting the temperature for warming, 9 tips for saving energy – Silvercrest SMK 15 A1 User Manual

Page 33: 1 cleaning the appliance

background image

SMK 15 A1

31

3. Push the drip tray 12 back in.

4.8 Setting the temperature for

warming

If the WARM function is selected the
appliance warms and the red indicator 10
lights up. It is neither necessary nor possible
to set the temperature separately.

4.9 Tips for saving energy

In order not to waste energy when using the
mini refrigerator, please note the following
points for cooling:
• Set up the mini refrigerator in as cool an

environment as possible. Avoid direct
sunlight.

• Set up the mini refrigerator to allow

sufficient cool air to circulate around it at
all times.

• Allow warm food to cool down first

before putting it into the appliance to
cool.

• Do not open the door more often than is

absolutely necessary.

• Do not leave the door open for longer

than is absolutely necessary.

• Switch off the mini refrigerator if it is not

required.

In order not to waste energy when using the
mini refrigerator, please note the following
points for keeping warm:
• Set up the mini refrigerator in as warm

an environment as possible.

• Set up the mini refrigerator to allow

sufficient air to circulate around it at all
times.

• Try to prevent warm food from cooling

down before putting it into the appliance
to keep warm.

• Do not open the door more often than is

absolutely necessary.

• Do not leave the door open for longer

than is absolutely necessary.

• Switch off the mini refrigerator if it is not

required.

5. Cleaning and maintenance

5.1 Cleaning the appliance

To ensure your appliance gives you lasting
service, you should clean it regularly.

Warning!

To avoid the danger of an

electric shock or damage:
–Always disconnect the power

supply before cleaning.

–Never immerse the appliance in

water.

–Never allow water or cleaning

agent to run into the appliance.

Caution!

Never use caustic or abrasive

cleaning agents, as they could damage the
appliance.
1. Pull out the drip tray 12 and empty it.

2. Clean the drip tray 12 in the sink.
3. Remove the shelf 14 and clean it in the

sink.

4. Clean the appliance with a damp cloth.

You could also use a mild washing-up
liquid if necessary.

5. Wipe it off with clean water.
6. Replace the drip tray 12 and shelf 14.
7. Do not use the appliance again until it is

fully dry.

RP71570 MiniCool LB5 Seite 31 Freitag, 25. November 2011 3:28 15