Silvercrest SRD 250 A2 - Manual (Page 16)

14 SRD 250 A2
GB
Handling and operation
Press the AL1 button ♦
16
or AL2 button
15
again to accept the
setting.
NOTICE
If you want to be awakened with the radio, apart from the wake ►
time programming you must also set, additionally, the desired
radio station and volume (see section Radio operation).
Switching the alarm function on
Press briefl y the AL1 button ♦
16
and/or AL2 button
15
. In the
display 2 a point appears to the lower left and/or right. The
alarm function is now activated.
Switching the alarm off
Whilst the alarm is sounding press the ♦ /BAND button 9 or the
AL1 button
16
and/or AL2 button
15
, to switch the alarm off for
24 hours.
Switching the alarm function off
Press briefl y the AL1 button ♦
16
and/or AL2 button
15
. The alarm
indicators go out in the display 2 .
Snooze function (“SNOOZE” function)
Whilst the alarm is sounding press the SNOOZE button ♦ to tempo-
rarily switch off the alarm. After 6 minutes the alarm sounds again.
NOTICE
When the snooze function is activated, a point appears in the ►
display 2 at the top right ( ).
Buch_66666_LB4 indb Abs2 14 15 06 2011 12 06 50 Uhr