United Office ULGD 350 A1 - Manual (Page 69)

66 ULGD 350 A1
GB
NOTICE
► Only after hot lamination: When the fi nished laminated pouch is
ejected from the pouch ejector slot
of the laminator, it is hot and can
easily change its shape. For this reason, let the laminated pouch cool for
one minute before touching it.
► To improve the lamination result, you can weigh a still hot laminated pouch
down with a book, a fi le folder or any other heavy, fl at object. This will
give it a smooth and fl awless surface.
♦ If you do not wish to start another laminating procedure, move the On/
Off switch
5 to "Off " and rotate the pouch thickness switch 4 to the ABS
position.
♦ Disconnect the plug from the mains power socket.
Anti-blocking function
At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance.
♦ Turn the anti-blocking switch 4 to the position ABS. The pouch will no longer
be drawn in.
♦ Remove the pouch and turn the anti-blocking switch 4 back to the desired
pouch thickness.
♦ Re-start the lamination process.
Cleaning
DANGER
Risk of potentially fatal electrical shock!
► Remove the plug from the mains power socket before beginning to clean
the appliance.
► Ensure that moisture cannot permeate into the appliance during cleaning.
IMPORTANT
Possible damage to the appliance.
► Do not use aggressive or abrasive cleaners as they may damage the surface
of the housing.
♦ Clean the housing of the appliance only with a lightly moistened cloth and
a mild detergent.
IB_91013_ULGD350A1_LB1.indb 66 IB_91013_ULGD350A1_LB1.indb 66 20.06.13 14:41 20.06.13 14:41