Auriol Z31261 - Manual (Page 9)

9
the hands of children. Children do not
appreciate the dangers associated with the
device.
• CAUTION! FIRE HAZARD! Never place
the product directly in the sun.
• Please make sure that your product is kept in a
dry and dust-free place.
• Always keep the product in the pouch.
• Do not subject your product to temperatures
greater than 60°C.
• Never look through the built-in lenses in direct
sunlight. It could damage the retina!
• Do not use the product in heavy rain.
Otherwise the product could be damaged.
Preparing for use
Commissioning
Spotting scope mounted on a tripod. Take the
supplied tripod out of the box and pull the legs
apart. Place the stand on a firm, level surface (e.g.
table). Below the tube clamp is the tripod mount.
To mount the telescope, thread the tripod adaptor
below the tripod head, then affix the spotting
scope on the screw.
Spotting scope to move
With the grip, the spotting scope can be moved
vertically and horizontally. If the hand guide
rotated counterclockwise it is unlocked, clockwise
it is locked.
Focus
With the help of the focus ring, the image can be
focused.
Zoom
By rotating the zoom ring, can be set individually,
the image section. After each setting on the zoom
ring to adjust the focus must also be readjusted.
Tube moving
At the tube clamp there is a locking screw. If this
screw is rotated counterclockwise, the tube can
be moved. Once the desired position is found, the
set screw is turned clockwise. Tube is no longer
movable.
Lens hood
In bright sunlight or oblique lighting, pull the sun
visor over the front of the spotting scope to avoid
reflections. NEVER look directly at the sun to avoid
risk of blindness.
Observation of the landscape / nature
When viewing landscapes or distant objects can
occur in summer temperatures by an uneasy air
flickering image. This is a physical effect and, like
fog or mist flow affect the image quality. Use either
the early morning hours for your observations or
reduce the magnification to increase the image
quality when you are in such a situation.
Cleaning and care
• Never take your product apart for cleaning.
• Use the cleaning cloth provided or a soft cloth
without threads to clean the product.
• Do not press hard when cleaning the delicate
lens surface.
• If the lenses are still dirty, dampen the cloth
with a little clear alcohol (methylated spirit).
Disposal
Dispose of product in accordance with local waste
disposal regulations.
Disposing of the packaging
Dispose of all packaging components in an
environmentally friendly manner.
GB/MT
75947 manual CB5_ES_PT.indd 9 6/13/2012 6:20:25 PM