Parkside PSBS 240 B2 - Manual (Page 51)

51
GB MT
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a final inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Intended use
The bench grinder with belt sander is a sta-
tionary grinding device for the coarse and
fine grinding of metal, wood and plastic. It
is suitable for deburring, rust removal and
grinding.
The device is not intended for all other
types of applications (e.g. grinding with
unsuitable grinding tools, grinding with a
coolant solution, grinding hazardous mate-
rials such as asbestos).
The equipment is intended for use in the
field of DIY. It is not designed for commer-
Content
Introduction ............................... 51
Intended use .............................. 51
General description .................... 52
Scope of delivery ........................... 52
Function description........................ 52
Summary ...................................... 52
Technical specifications ............... 53
Safety Instructions...................... 53
Symbols and icons ......................... 54
General safety instructions .............. 54
Further Safety Instructions ................ 56
Residual risks ................................. 57
Assembly ................................... 57
Assemble/set spark protection ......... 57
Assemble/set workpiece supports .... 58
Screw device on to workbench ........ 58
Operation .................................. 58
Switching on and off ...................... 59
Grinding with the grinding disc ....... 59
Tape loops .................................... 59
Change grinding belt ..................... 59
Change grinding disc ..................... 60
Cleaning and maintenance ......... 61
Cleaning ....................................... 61
Storage ...................................... 61
Waste disposal and
environmental protection ........... 61
Replacement parts/accessories ... 62
Trouble Shooting ........................ 63
Guarantee ................................. 64
Repair Service ............................ 65
Service-Center ............................ 65
Importer .................................... 65
Translation of the original
EC declaration of conformity ...... 83
Exploded Drawing ..................... 85